Products
Home » Products » PC Round Solar Stud For Road B1

PC Round Solar Stud For Road B1

Body material: PC(Japan Brand)
Warranty: 12 Months
Power supply:  USA Brand Flexible High Efficient Solar Panel 5V/0.4W
Visual distance: > 800m
Load Bearing: 20 Tons
Working Mode: Flashing or Constant
Waterproof: IP68
Shank: Without shank

Product Introduction

PC Round Solar Stud For Road Features

  • High brightness America brand led with 100000 hours of working time.
  • USA brand solar panel. 22% high conversion rate. Fast charge rate.
  • Japan brand Anti-UV PC case.
  • The LED lights of pc Solar Stud For Road come on automatically as soon as it starts getting dark every night.
  • Cost-effective,Solar Stud For Road are easy to install and require absolutely no wires or maintenance.
  • Most quality Epoxy resin glue to fix the Solar Stud For Road, maower charge.
  • Accept OEM/ODM

 

PC Round Solar Stud For Road color
PC Round Solar Stud For Road color

Five colors for choice: White, Amber, Red, Blue, Green

 

PC Round Solar Stud For Road Parameters

 

    Material:     PC(Japan Brand)
    Power supply:     USA Brand Flexible High Efficient Solar Panel 5V/0.4W
    Battery:     NI-MH 1.2V/600MAH or Lithium battery 3.2V/500MA
    Working model:     Blinking or Constant
Charging in daytime and working automatically at night
    LED colors:     Yellow, White, Red, Green, Blue
    Life span:    >3 Years
    Load Bearing:     20T
    Size:     φ117*23mm (φ4.61″*0.91″)
    Visual distance:     >800M
    Water poof:     IP68
    Carton Size:     2pcs/box; 60pcs/ctn; weight: 19kgs; carton size: 67.5*28*20cm
2pcs/box; 60pcs/ctn; weight: 41.49bs; carton size: 26.57″*11.02″*7.87″

 

PC Round Solar Stud For Road
PC Round Solar Stud For Road

 

Application of PC Solar Stud For Road B1:

♥Schools and hospitals

♥Gardens

♥Deck and Dock

♥Walking paths

♥Bridge

♥Parks and campuses

♥Roundabout

 

How to install PC Round Solar Stud For Road B1:

  1. Determine the installation location and distance, clean the surface of the Solar Stud For Road, and ensure that the Solar Stud For Road are installed on a flat road surface.
  2. Clean the bottom of the Solar Stud For Road and apply the epoxy glue evenly to the back of the stud.
  3. Press the side with glue on the road, secure the position, wait for the glue to dry out.
  4. Check within 2 hours of installation to ensure that all Solar Stud For Road are properly installed and do not bend or deform due to compression.
  5. Please evacuate the installation isolation facility 6-8 hours after installing the Solar Stud For Road.
Related Products
Send Your Inquiry
Please feel free to submit your inquiry information to us.
Copyright © Henan Ruichen Traffic Equipment Co., LTD All Rights Reserved