Products
Home » Products » High-Quality Solar Stud For Road D1

High-Quality Solar Stud For Road D1

Load Bearing: 20 Tons
Warranty: 12 Months
Body material: Heavy duty casting aluminum
Power supply:  Solar panel(monocrystalline 2.5V/0.2W)
Visual distance: > 800m
Working Mode: Flashing or Constant
Waterproof: IP68

Product Introduction

High-Quality Solar Stud For Road D1 Features:

•Up to 800 meters of visibility.

•Reliable all night, all-year-round performance.

•Totally sustainable harnessing free solar energy.

•Used where street lighting is either unavailable, Solar Stud For Road not cost-effective, or environmentally impossible.

•Cost-effective, Solar Stud For Road are easy to install and require absolutely no wires or maintenance.

•Solar Stud For Road self-contained surface mounted.

•Solar Stud For Road for road accept OEM/ODM

 

Raised Aluminum LED Solar Stud Light color
Five colors for choice: White, Amber, Red, Blue, Green

 

LED Solar Stud For Road Parameters:

 

    Material:     Heavy duty casting aluminium
    Power supply:     Solar panel(monocrystalline 2.5V/0.2W)
    Battery:     NI-MH 1.2V/800MAH or lithium battery
    Working model:     Blinking or Constant
Charging at daytime and working automatically at night
    LED:    Diameter 5mm;2pcs or 3pcs per side
    LED colors:     Yellow, White, Red, Green, Blue
    Life span:    3 years
    Resistance:     >20T(static)
    Size:     L104*W104*H20mm  (L4.09″*W4.09″*H0.78″)
    Visual distance:     >800M
    Water poof:     IP68
    Carton Size:     60pcs/ctn(2pcs/box);21kgs; Carton size:58.5*24.5*18.5cm
[60pcs/ctn(2pcs/box);46.30bs; Carton size:23.03″*9.65″*7.28″]

 

High-Quality Solar Stud For Road D1
High-Quality Solar Stud For Road D1

 

Application of High-Quality Solar Stud For Road D1 D1:

♥Schools and hospitals

♥Gardens

♥Deck and Dock

♥Walking paths

♥Bridge

♥Parks and campuses

♥Roundabout

 

Installation Method Of  Solar Stud For Road D1:

  1. Determine the installation location and distance, clean the road surface, and ensure that the Solar Stud For Road are installed on a flat road surface.
    Clean the bottom of the Solar Stud For Road and apply the epoxy glue evenly to the back of the studs.
    3. Press the side with the glue on the road, fix the position, wait for the glue to dry.
    4. Check within 2 hours of installation to ensure that all solar studs are not installed incorrectly and are not bent or deformed due to compression.
    5. Remove the installation isolation facility within 6-8 hours after the installation of the Solar Stud For Road.
Related Products
Send Your Inquiry
Please feel free to submit your inquiry information to us.
Copyright © Henan Ruichen Traffic Equipment Co., LTD All Rights Reserved