Load Bearing: >30T(static)
Warranty: 12 Months
Body material: Heavy-duty casting aluminum
Battery: Lithium battery 1000mA
Visual distance: ＞ 800m
Working Mode: Flashing or Constant
Waterproof: IP68
Compressive Solar Stud For Road Features:
•Up to 800 meters of visibility.
•Reliable all night, all-year-round performance.
•Totally sustainable harnessing free solar energy.
•Used where street lighting is either unavailable, solar stud not cost-effective, or environmentally impossible.
•Cost-effective, LED Solar Studs For Road are easy to install and require absolutely no wires or maintenance.
•Solar-powered Road Studs For Road self-contained surface mounted.
•Solar studs for road accept OEM/ODM
Compressive Solar Stud For Road Pavement Marker Parameters:
| Material: | Aluminium+ PC |
| Power supply: | Solar panel(monocrystalline 2.5V/0.3W) |
| Battery: | Lithium battery 1000mA |
| Working model: | Blinking or Constant Charging at daytime and working automatically at night |
| Life span: | 5 years for lithium battery; |
| LED colors: | Yellow, White, Red, Green, Blue |
| Resistance: | >30T(static) |
| Size: | φ123*45mm (φ4.84″*1.77″) |
| Visual distance: | >800M |
| Water poof: | IP68 |
| Carton Size: | 1pcs/box; 30pcs/ctn; Weight: 30kgs; Carton size: 67.5*28*20cm (1pcs/box; 30pcs/ctn; Weight: 66.14bs; Carton size: 26.57″*11.02″*7.87″) |
Application of Compressive LED solar studs For Road C3:
♥Schools and hospitals
♥Highways
♥High traffic areas
♥Walking paths
♥Transit stations
♥Parks and campuses
♥Urban Road
How to install Solar Studs Pavement Marker C3:
1.Carefully mark the distance between the placement of Solar Studs For Road. To prevent an adverse effect on the ground, use a proper tool such as Core Drill. Drill 125mm and depth will be 45mm.
2.Remove all debris from the installation hole.
3.Pour epoxy into the holes per the manufacturer’s instruction.
4.Verity that the installation hole is straight. Verify that the installation hole is large enough to allow the epoxy to surround the Solar Stud For Road.
5.Set the lighting surface of the Solar Stud For Road to the desired viewing angle. Verify the epoxy is evenly adhering to the installation hole and Solar Stud For Road.
After curing the LED solar road studs for 6-8 hours, remove the installation of the isolation facility.
