Advantages of LED Solar Stud For Road

LED Solar Stud For Road provide a good solution for a safe and sustainable infrastructure, providing road layout with superior distance visibility. The LED Solar Stud For Road is activated at the beginning of dusk. Once the morning sunlight intensity exceeds 100 lux, the light will stop and the battery will start to charge. They maintain light output throughout the annual cycle and have been proven to increase safety at night. Even on cloudy or rainy days, LED Solar Stud For Road will be effectively charged to 100% in about 3 hours.

The advantages of these LED Solar Stud For Road over reflective road studs are:

1. LED Solar Stud For Road to use the built-in sensor to automatically illuminate at dusk and recharge during the day.

The output power of the LED is> 100Hz, which can be seen within 900 meters. Thanks to the installation of LED Solar Stud For Road, we have a cable-free, therefore easy and fast possibility to make pedestrians pass more safely.

2. LED Solar Stud For Road use solar energy to drive the embedded LED lights.

Adding embedded LED lights to each Solar Stud For Road, by increasing the driver’s reaction time, makes these reflectors have significant advantages over the traditional road stud. Since the reaction time depends mainly on the vision, LED Solar Stud For Road can give drivers a reaction time of up to 30 seconds instead of the traditional road stud 3.2 seconds. Drivers with ten times higher-visibility can reduce the accident rate to 70%.

3. More obvious warning effect

The reflector effect of the ordinary LED Solar Stud For Road in rainy or foggy weather is very poor, so the warning effect that people want can not be achieved. The LED Solar Stud For Road are built-in LED lamp beads, which have stronger penetration and will not be affected by rain and fog. In bad weather can still play a good guiding effect.

LED Solar Stud For Road are widely used in the basic road infrastructure sector, including the emphasis on dangerous curves, the introduction of traffic calming measures, marking bicycle lanes, and roundabouts. In addition, LED Solar Stud For Road are very suitable for harbor and recreational venues, such as piers, piers and footbridges, parking lots, and public plazas.